Godex AG2000-ZX
The AG2000-ZX print & apply solution is based on the same applicator arm as the AG2000. It is a system for batch labelling.
The roll-on applicator head labels the top- and right side of products forwarded on e.g. a conveyor belt. The width and the
height of the products in one batch needs to be more or less the same but the foam rubber roller does enable the labeling
of irregular shaped products such as vacuum-packed fish, bread in bags and wrap packed vegetables.
The AG2000-ZX solution uses the powerful ZX1000i printer series therefore allows for higher conveyor belt speeds than the
AG2000 does. The applicator part consists of a control unit and three main mechanical parts: a bracket that supports the
printer and holds the diverter pulleys, an applicator arm with adjustable height to suit various box- and product sizes, and a
ventilator unit.
The diverter pulleys and the ventilator unit is adjustable to suit particular label sizes. The crucial advantage of having the
ventilator unit is there will be no need to synchronize the printer and the conveyor belt. In addition, the ventilator’s capacity
can be tuned to meet the specific weight, length and “memory effect” of the labels that are used.
The items listed under “accessories” are all the components you need to complete your system for a ready-to-use and easy
installable solution. Drawings and specifications can are available in the GoDEX catalogue.
The complete system such as floor stand and tubes fit in just one box. This reduces the transportation costs compared to
shipping on a pallet, which is usually required for this kind of solutions. The printer comes in a second box. With its relatively
low cost, it renders an excellent return in investment.
The roll-on applicator head labels the top- and right side of products forwarded on e.g. a conveyor belt. The width and the
height of the products in one batch needs to be more or less the same but the foam rubber roller does enable the labeling
of irregular shaped products such as vacuum-packed fish, bread in bags and wrap packed vegetables.
The AG2000-ZX solution uses the powerful ZX1000i printer series therefore allows for higher conveyor belt speeds than the
AG2000 does. The applicator part consists of a control unit and three main mechanical parts: a bracket that supports the
printer and holds the diverter pulleys, an applicator arm with adjustable height to suit various box- and product sizes, and a
ventilator unit.
The diverter pulleys and the ventilator unit is adjustable to suit particular label sizes. The crucial advantage of having the
ventilator unit is there will be no need to synchronize the printer and the conveyor belt. In addition, the ventilator’s capacity
can be tuned to meet the specific weight, length and “memory effect” of the labels that are used.
The items listed under “accessories” are all the components you need to complete your system for a ready-to-use and easy
installable solution. Drawings and specifications can are available in the GoDEX catalogue.
The complete system such as floor stand and tubes fit in just one box. This reduces the transportation costs compared to
shipping on a pallet, which is usually required for this kind of solutions. The printer comes in a second box. With its relatively
low cost, it renders an excellent return in investment.
Printing
Print method:
Thermal transfer/Direct thermal
Resolution: 203 DPI, 300 DPI, 600 DPI
Max. print speed: 254.0 mm/s
Max. line speed: 24.0 m/min
Max. print width: 105.0 mm
Max. print length: 150.0 mm
Resolution: 203 DPI, 300 DPI, 600 DPI
Max. print speed: 254.0 mm/s
Max. line speed: 24.0 m/min
Max. print width: 105.0 mm
Max. print length: 150.0 mm
Supplies
Min. label width with liner:
25.0
mm
Max. label width with liner: 110.0 mm
Min. label length: 30.0 mm
Max. label length: 150.0 mm
Max. label roll diameter: 200.0 mm
Max. ribbon roll length: 450.0 m
Ribbon winding direction: IN, OUT
Max. label width with liner: 110.0 mm
Min. label length: 30.0 mm
Max. label length: 150.0 mm
Max. label roll diameter: 200.0 mm
Max. ribbon roll length: 450.0 m
Ribbon winding direction: IN, OUT
Communication
Interfaces:
Ethernet, USB device, USB host
Software
Enclosed software:
GoLabel
Supported print languages: EZPL, GEPL, GZPL
Supported print languages: EZPL, GEPL, GZPL
Environment
Temperature:
5-40
Humidity: 20-85 %
Humidity: 20-85 %
Physical
Dimmensions:
870x200x240
mm
Weight: 7.0 kg
Weight: 7.0 kg
Warranty: 24 month
Download specifications
Download drivers